Skip to content
Edmonton Mould

Basement Mould Removal in Edmonton

Yes. We remove basement mould properly, contained, removed and cleaned, and find the leak or damp that caused it.

  • ✓ 24/7 emergency line
  • ✓ Serving Edmonton and area

Get a free quote

Alberta postal codes start with T.

Have photos? Text them to 780-996-7950 with your name.

Prefer to talk? Call 780-996-7950.

Signs you need this

  • A musty smell that's stronger in the basement
  • Spots or staining at the bottom of drywall or on baseboards
  • Mould on stored boxes, carpet or the back of furniture
  • Damp patches on foundation walls or past water stains

Why basements grow mould

Basements are the most common place we find mould. They sit against cold, damp ground, they’re where floods and leaks end up, and finished basements hide walls behind drywall and carpet.

Mould grows indoors where there are leaks, high humidity or condensation. In basements that usually means:

  • Foundation leaks through cracks or around window wells.
  • A past flood that was mopped up but never properly dried.
  • Plumbing leaks under sinks, at the water heater or behind the laundry.
  • Condensation on cold concrete walls behind finished drywall.

How we remove it

  1. Find and stop the moisture. Otherwise the mould comes back.
  2. Contain the area. Plastic barriers and negative air keep spores from spreading through the house.
  3. Remove contaminated materials. Mouldy drywall, insulation, carpet and underpad are cut out and bagged.
  4. Clean. HEPA vacuuming and cleaning of the remaining surfaces.
  5. Clearance testing. Confirms the area is clean before it’s closed up.
  6. Fix the cause. Sealing, drainage or ventilation, so it stays dry.

Bleach alone isn’t enough. Alberta Health Services says treatment with only a biocide or disinfectant such as bleach is not acceptable remediation. The mouldy material has to come out. Read why bleach doesn’t fix mould.

Asbestos in older homes

Older Edmonton homes may contain asbestos in drywall compound, flooring or insulation that mould removal would disturb. If we suspect asbestos, licensed abatement professionals test it and remove it before our mould work goes ahead. Our crews don’t do asbestos abatement.

When the moisture is a foundation leak

If water is coming through the foundation, the crack needs its own repair. Our sister company Edmonton Crack Repair seals foundation cracks. If you have standing water right now, Water Damage Edmonton handles water removal and drying.

Our process

  1. Find the moisture

    Foundation leaks, past floods, plumbing drips or condensation. We find it first.

  2. Contain

    The work area is sealed off and kept under negative air so spores don't spread.

  3. Remove

    Mouldy drywall, insulation and carpet are cut out and bagged. Bleach alone is not a fix.

  4. Clean and verify

    HEPA vacuuming and cleaning, then clearance testing to confirm the job worked.

What it costs

About $500 for a small contained area to $6,000+ for large or hidden growth

Typical Central Alberta range. Final price confirmed after inspection.

Source: DKI Central Alberta, mould remediation cost

Questions people ask

Why does my basement keep getting mould?

Because the moisture is still there. Common sources are foundation leaks, a past flood that wasn't fully dried, plumbing leaks and condensation on cold walls. Remove the mould without fixing the moisture and it comes back.

Can I just spray it with bleach?

No. Alberta Health Services says treating mould with only a biocide or disinfectant such as bleach is not acceptable remediation. Contaminated materials have to be removed and surfaces cleaned.

Does all the drywall have to come out?

Only the affected sections, plus a margin around them. We measure moisture to find the edges.

What about asbestos in older basements?

Older Edmonton homes may have asbestos in materials we'd disturb. If we suspect it, licensed abatement professionals test and remove it before mould work goes ahead. Our crews don't do asbestos abatement.

Talk to us today

Call, or send a few details and photos and we will get back to you.

CallGet a quote